8ft Trampoline Net (Suitable For Trampolines With 6 Existing Enclosure Poles)

These 25mm plastic caps will fit on to enclosure poles for 8ft, 10ft, 12ft, and 14ft trampolines which are 25mm in diameter. Useful if you need to replace the top caps for your enclosure poles, or if you need them to fit a tie attachment net. Made from a high-density thermoplastic, these pole caps are virtually unbreakable.

Come in PACKS OF 8. If you need more then 8 pole caps, please amend the quantity in your Shopping Basket

How Do I Attach The Netting? Place the trampoline pole cap on top of the enclosure pole. The netting attaches to the cap on the top of the surround poles via strong straps (supplied with the netting). Once attached to the enclosure poles, the netting hangs on the inside of the poles and goes outside the trampoline pads and then under the frame, clipping on to the jump mat (see thumbnail above left).

These foams measure 25mm internally so will fit on to any enclosure pole of 25mm in diameter. The external diameter of the foam is 50mm. Please note the foams are white and are 1.63m long. Should your existing foams be shorter than this, the new foams can easily be cut down the to correct length.

These replacement foams are made from a high density foam, and are designed to cushion the trampoline user, should they fall against the trampoline enclosure pole. They are designed to not rot, even if they get damp. Should you require them, we also sell the PVC sleeves that cover these foams, and help to lengthen the life span of the foam covering.

Come in packs of EIGHT. If you need more then 8 foams, please change the quantity in your Shopping Basket.

These protective sleeves simply slide over your existing trampoline enclosure pole and foam. They are 1.53m in length and are designed to be universal and fit over any foam and pole that measures 50mm in diameter. It is worth checking that these sleeves will fit your trampoline enclosure poles before you order. Please note that you can cut the sleeves to the correct length if your existing sleeves are shorter.

These protective sleeves are designed to protect the foam covering on the trampoline surround pole. They are made from a high quality PVC and are fully weatherproof, so will not wear or allow the foams to get damaged. These sleeves are supplied in green.

Set of FOUR. Should you need more than one set of four sleeves, please change the quantity in the shopping basket. Also available in sets of 8.

These protective sleeves simply slide over your existing trampoline enclosure pole and foam. They are 1.53m in length and are designed to be universal and fit over any foam and pole that measures 50mm in diameter. It is worth checking that these sleeves will fit your trampoline enclosure poles before you order. Please note that you can cut the sleeves to the correct length if your existing sleeves are shorter.

These protective sleeves are designed to protect the foam covering on the trampoline surround pole. They are made from a high quality PVC and are fully weatherproof, so will not wear or allow the foams to get damaged. These sleeves are supplied in green.

Set of EIGHT. Should you need more than one set of eight sleeves, please change the quantity in the shopping basket. Also available in sets of 4.